McKays 5 Best Loved Oiled Floor Finishes

McKays 5 Best Loved Oiled Floor Finishes

Whether you choose engineered wood or solid wood flooring, you can get a ton of different finishes. An oil finish shows off the natural beauty of the wood while adding a layer of protection and nourishment. Over time, wood flooring can lose its sheen. You can refresh and revive your wood flooring with oil. Keep reading to find out McKays five best loved oiled floor finishes to upgrade your decor. 

In this article: 

  • Lacquered vs Oil Finished Wood Flooring 
  • Why is it Important to Oil Your Wood Flooring?
  • 5 of the Best Oiled Floor Finishes 

Lacquered vs Oil Finished Wood Flooring 

When it comes to wood floor finishes, you will likely have to decide between lacquered or oil finishes. In terms of cost, there isn’t a huge difference between the two. Traditionally, oiled flooring would have a matt finish, and lacquer looked glossy. But with changes in technology, you can have a glossy oil finish or an ultra-matt looking lacquer. 

The main difference between the two finishes comes down to performance. Lacquer tends to be more water-resistant than oil; however, it shows scratches more easily. An oil finish is great for a natural finish. What’s good about an oil finish is that the oil goes deeper into the wood and provides protection on a surface level and deep into the core. Often, oil finished flooring looks like nothing has been applied so that you can achieve a natural effect. 

Why is it Important to Oil Your Wood Flooring?

An oil finish will increase the longevity of your wood flooring. Wood flooring is an investment. You want to take steps to make it last longer and keep it looking great. The oil will protect the surface and will keep it looking newer for longer. When first buying wood flooring, you need to use a finish like oil or lacquer to protect it from damage. 

Another way you can use oil finishes is to revive wood flooring. So, if your flooring is looking a bit scratched and has lost its initial sheen, you can sand down the flooring to buff out scratches and scuffs. You can then top it off with an oil finish. This brings out the natural design details in the wood and rejuvenates a tired-looking flooring. 

5 of the Best Oiled Floor Finishes 

Whether you’re deciding on a finish for your new wood flooring or looking to revive an old wood flooring, here are five of the best oiled floor finishes to consider. 

1. Natural Oiled 

Natural oil is a common finish for engineered wood flooring. It gives a classic and natural look to the board. In general, you need to reapply oil more often than lacquer. But this is easy to do while still retaining the natural beauty of the wood. 

2. UV Oiled

Ultraviolet (UV) oiled floors are dried with UV light. Usually, wood treated with UV oil has more shine than air-dried boards. It’s similar to lacquer but brings out more of the natural features of the wood. This type of oil protects the wood and is resistant to scratches and scuffs. 

3. Hardwax Oiled

Hardwax oil is a wood finish that consists of three layers of wax. The oil quickly penetrates the wood and strengthens the flooring. The wax creates a hard protective layer on the surface of the floorboard. This protects the flooring from moisture and also, general wear and tear.

4. Danish Oiled

Danish oil is another popular wood finish. It’s a combination of oil, varnish, and thinner. The mixture brings out the natural beauty in the wood while creating a layer of protection. Danish oil helps to enrich and darken the look of natural wood. 

5. Brushed & Oiled

When wood flooring is brushed, it creates a textured surface. You can get a light to a heavy brushed effect using a wire rotary brush. After brushing the wood, you can use an oil finish to increase protection and resistance to scratches. 

You can use one or a combination of finishes to create a specific look. Whether you’re installing a new wood flooring or looking to freshen up your existing flooring, an oiled finish can increase the natural beauty of the wood while increasing protection.

May 27, 2021 — Richard McKay
Walk-In Wardrobe Flooring Ideas for Your Dream Dressing Room

Walk-In Wardrobe Flooring Ideas for Your Dream Dressing Room

If you’re dreaming of a walk-in wardrobe, this is your signal to make it happen. Create a magical place to get ready for the day or evening ahead that you love. A walk-in wardrobe can look high-end, quirky or elegant. At the same time, it’s a very functional space that keeps your clothes, shoes, and accessories in order. You can save time by knowing exactly where everything is and organise your wardrobe more effectively. Your walk-in wardrobe flooring has a huge impact on how you use the space and how it looks. Keep reading to find out the best type of flooring for walk-in wardrobes and three flooring ideas you can try. 

In this article: 

  • Create the Dressing Room of Your Dreams 
  • What Types of Flooring is Best for Walk-In Wardrobes? 
  • 3 Walk-In Wardrobe Flooring Ideas 

Create the Dressing Room of Your Dreams 

When creating your dressing room, there are a few things you need to consider. Firstly, you need to assess your needs. Determine exactly how you want to use the space so that you can create an area that’s entirely suited for you.

Factors such as the space available and budget will also play a big role in designing your dressing room. Adding a walk-in wardrobe or upgrading your current one can put that final touch of elegance on your house, so you want to get it right the first time. 

The wrong flooring choice could result in your dressing room being uncomfortable or impractical. The correct flooring however, will fit your lifestyle, aesthetic and improve the daily process of getting dressed each morning. You may also want to consider underfloor heating. Not all flooring is compatible with underfloor heating, so this may eliminate some of your options. 

What Types of Flooring is Best for Walk-In Wardrobes? 

If you are on a tight budget, carpet is the most inexpensive option for walk-in wardrobe flooring. Carpeting is good for adding warmth and cushioning underfoot. However, it generally appears not as upscale as some of the other options and is sometimes more difficult to keep clean. If budget is the most important factor, carpet is a good option. 

Another option is wood flooring which is ideal for adding a touch of elegance to your dressing room. It’s often a more expensive choice but can create a standout piece of design that looks high-end yet retains a lot of function. 

3 Walk-In Wardrobe Flooring Ideas 

Walk-in wardrobes and dressing rooms are high on the list of sought-after dream spaces in the house. Whether you have a range of luxury designer items or are looking for a way to declutter your bedroom and remove bulky drawers and cupboards, a bespoke wardrobe space immediately turns up the luxe feel in your house. Here are three walk-in wardrobe flooring ideas to inspire your next project.  

1. Herringbone Parquet Flooring

If you’re looking for statement flooring, then Herringbone parquet flooring is a fantastic option. The parquet flooring uses an engineered composition for additional structural stability. With an understated and elegant finish, you can buy parquet flooring in a range of tones and shades to compliment your interior design. 

2. Engineered Wood Flooring

Engineered wood features a top layer of real wood for a high-end and beautiful finish. As the flooring uses a plywood core, it’s much more suitable for a range of environments. If underfloor heating is a must-have feature for your walk-in wardrobe, engineered wood is among the top options. It’s compatible with underfloor heating and features a thick top layer, which you can sand down several times. 

3. RVP Vinyl Flooring

If you’re looking for something that looks fantastic and elegant but has a higher level of resistance, RVP vinyl flooring is a good choice. This would be ideal for a house with children as it creates a high-end finish but is extremely functional. It’s water-resistant and extremely stable, making it suitable for all rooms in the house. 

When designing your walk-in wardrobe, you have various elements to consider. It’s an exciting project, from bespoke storage options and hanging areas to shoe boxes and shelves. Your flooring will have a massive impact on the overall look and finish of your room therefore it’s important that you install flooring that not only looks fantastic but will serve it's function for years to come.

May 07, 2021 — Richard McKay
How to Maintain and Clean Engineered Wood Floors 

How to Maintain and Clean Engineered Wood Floors 

While engineered wood is not as vulnerable to moisture as solid wood, it still has a top layer of real wood. It is important therefore that you clean and maintain it properly to increase longevity and keep it looking great. Wood is known for being incredibly durable and long-lasting, but regular cleaning and care will only make it better. There are several things you can do to keep your flooring looking fresh and fantastic.  

In this article: 

  • How to Take Care of Engineered Wood Flooring 
  • 7 Tips for Maintaining Engineered Wood Floors 

How to Take Care of Engineered Wood Flooring 

Engineered wood has unique properties that make it ideal for a range of environments. You can install engineered wood in commercial and residential settings like living rooms, open kitchen diners, bedrooms, retail and hospitality areas. 

Because of the multilayer construction of engineered wood, it’s strong, stable, and very hard-wearing. In general, it can withstand high levels of wear and tear. This makes it an excellent choice for high traffic family areas and commercial settings that experience a lot of use. 

7 Tips for Maintaining Engineered Wood Floors 

As tough and stable as engineered wood is, it still requires regular cleaning and maintenance to keep it looking great and functioning well. Here are seven tips to help you take care of your engineered wood flooring. 

1. Use a Damp Mop/Cloth

While engineered wood is more adapt to handling varying moisture levels, it doesn’t like to be swimming in water. When cleaning the floor, avoid soaking the area. Instead, use a damp map or cloth to clean the floor. Your mop should be slightly damp and not wringing wet. 

2. Clean Up Spills ASAP

You must clean up any spills as soon as they happen. Just as you shouldn’t use an overly wet mop, you should not leave any standing water on the floor. While engineered wood is less susceptible to water damage than solid wood flooring, it’s not designed to be soaking wet. Over time, too much exposure to liquids could result in damage. Avoid using steamers, wet cleaners, or any cleaning tool that would allow a lot of water to seep down between the planks. 

3. Wipe in the Direction of the Grain

For the best results, wipe in the direction of the grain when cleaning your engineered wood flooring. It can help remove dust and dirt from cracks in the flooring much more effectively. A microfibre cloth is ideal for collecting dust without causing any damage to your flooring. 

4. Create a Consistent Cleaning Routine

A consistent cleaning routine will help prolong your flooring and keep it looking it's best. A regular clean includes removing any dust and debris by vacuuming and dusting and running a damp mop over the floor.  If you don’t regularly remove debris from your engineered wood, it can potentially act as an abrasive material and end up scratching the floor. Avoid using a vacuum with a rotating bristle bar. Instead, use a floor-brush attachment. Occasionally, you can treat your flooring with a deeper cleaner to help remove tougher grime. 

5. Avoid Harsh Cleaning Products

You must avoid using any harsh cleaning products and chemicals on your flooring. Don’t use cleaners with ammonia or wax-based cleaners. Also, watch out for any abrasive materials in cleaning products, as these could potentially damage your floors. If in doubt, test your cleaning products on a spare board if you have one. 

6. Use Doormats

You can actively reduce any mess in the first place by using rugs and placing doormats at each exterior door in the home. You should avoid mats and rugs with a rubber backing, as this may damage the flooring. Doormats are also great for keeping as many allergens out as possible, like pollen, pesticides, and dust. 

7. Use Protective Pads on Furniture

Felt furniture protective pads are perfect for reducing the risk of scratches on wooden floors. Durable felt pads are hardy enough to withstand the use of heavy furniture and repeated movement. When applied properly, felt protective pads can create a good level of cushion between your engineered wood flooring and furniture. 

Your cleaning kit should include a mop, vacuum, soft broom, and a cleaner that the manufacturer recommends. This will help you to take on everyday maintenance, clean up spillages quickly, and protect against marks and scratches that can impact how your flooring looks. These tips are relatively simple and straightforward and will help you keep your wood flooring looking fantastic for years to come.

May 03, 2021 — Katie McKay


Vinyl flooring is one of the most popular choices for homes, commercial, and office environments. Luxury vinyl tiles can easily handle high-traffic areas and fluctuating temperatures, making them suitable for all environments. If you’re looking for flooring that is highly durable and stable, here are six ways you can use luxury vinyl tile. 

In this article: 

  • How is RVP Luxury Vinyl Made?
  • Why Install RVP Luxury Vinyl in Your Next Project 
  • 6 Uses of RVP Luxury Vinyl 

How is RVP Luxury Vinyl Made?

RVP Luxury Vinyl stands for Rigid Vinyl Plank. It’s the next generation of luxury vinyl that feature unique properties. With a huge 0.7mm, the vinyl tiles are scratch and stain-resistant and prevent discolouration from UV light. 

In addition to the protective top layer, RVP Luxury Vinyl has an extremely stable SPC (Stone Polymer Composite) core. This is what makes the vinyl suitable for all environments because it helps to avoid expansion and contractions. If you’re installing flooring in an area with fluctuating temperature and humidity levels, it’s so important that it has a stable core. 

The construction of RVP Luxury Vinyl means that you have a super durable and long-lasting floor that also looks great. The flooring features an in-built underlay which makes it easy to maintain and clean. 

6 Uses of RVP Luxury Vinyl 

Whether you’re planning a complete bedroom renovation or looking to upgrade your office interior, you can use RVP Luxury Vinyl in various ways. Here are six uses of luxury vinyl for your next project.

1. Bathroom and Kitchen 

Bathrooms and kitchens are known for spillages, humidity, and changing temperatures. Usually, this means you have to narrow down your flooring choice. Something like solid wood flooring isn’t suitable for these types of environments. When you add changing temperatures and humidity levels to the mix, you need to make sure your flooring can cope. RVP Luxury Vinyl has an uber stable core, making it an excellent choice for bathrooms and kitchens.

2. Bedroom and Living Room 

Luxury Vinyl is easy to maintain and clean. This makes it ideal for living spaces with regular use. Often bedrooms and living rooms are used daily and require regular cleaning. RVP Vinyl Tiles are scratch and stain-resistant. These are must-have features for living spaces, especially when you have children. 

3. Conservatories 

As conservatories can vary in temperature, it’s another area of the house that needs careful consideration when choosing your flooring. Vinyl is family and pet-friendly. If you’re looking to evoke the look and feel of wood flooring or tiles, vinyl can help you do this at a fraction of the cost and is much more suitable for a conservatory environment. 

4. Hotels and Hospitality 

Luxury Vinyl Tiles are not just for home and residential projects but are well suited to the hotel and hospitality industry. This is because these environments tend to have high-traffic areas and need to be water, scratch, and stain-resistant. In the hotel and hospitality industry, it’s crucial that you can clean and maintain the flooring easily.

5. Fitness Studios and Gyms 

Another way you can use RVP vinyl flooring is in fitness studios and gyms. As the vinyl tiles are water and scratch-resistant, they can handle sweaty and high-moisture environments. If you’re looking to create a boutique and high-end fitness environment with excellent durability, vinyl is a good option. 

6. Sports and Recreation Centres 

Luxury Vinyl is a fantastic option for sports and recreation centres. If you have a multipurpose facility and you’re looking for a high-end and beautiful finish, vinyl tiles are easy to install and maintain. 

The unique construction of RVP Luxury Vinyl means that you can install vinyl in all environments. You don’t have to sacrifice style for performance, as the tiles are constructed to not only look great but with excellent durability and stability. From bathrooms and kitchens to gyms and fitness studios, you can install luxury vinyl tiles in a range of projects.

April 27, 2021 — Richard McKay
Buying Guide for Engineered Wood Flooring-Marcias Flooring

Buying Guide for Engineered Wood Flooring

When buying engineered wood flooring, there is a lot of options. You have different species, colours, various tones, and finishes to consider. Engineered wood is a high-end alternative to solid wood flooring, suitable for all around the house. To help you make the best choice, here is a quick guide to buying engineered wood flooring. 

In this article: 

  • What is Engineered Wood Flooring?
  • Engineered Wood vs Solid Wood
  • Wood Flooring Materials and Finishes 

What is Engineered Wood Flooring?

Engineered wood flooring uses a construction of layers. It has a top layer of real wood. The top layer needs to be very tough to withstand high traffic areas throughout the house or commercial environments. It’s the top veneer layer that gives engineered wood flooring that rich and natural aesthetic.

Ideally, you want to use a floorboard with a thicker top layer. This is because you can sand and refinish the real wood layer several times therefore the thicker the wear layer, the better. Typically, the thickness of the top layer will range from 3mm to 7mm. In general, this type of flooring has a guaranteed lifespan range from 10 to 30 years, depending on the manufacturer. By resanding and refinishing the surface, you can maintain the appearance by removing built up dirt, scuff marks and scratches.

Under the top layer of wood, there are several layers to increase stability. These layers are glued together to create a plywood-like base. It’s this layered construction that makes engineered wood flooring less prone to damage from moisture and humidity than hardwood. 

Engineered Wood vs Solid 

If you’re looking to upgrade your flooring and love the look of wood, you have probably come across both engineered wood and solid wood flooring. So, what’s the difference. More and more people choose to fit engineered wood flooring in the home for a number of reasons.

Engineered wood comes in a wide range of finishes, colours, tones, and timber to suit any style. You can also get different effects like aged, sun-bleached or brushed to bring your design to your specifications and add greater character to your floor. Engineered wood comes pre-finished so there is no need to finish or oil the flooring yourself. 

Unlike solid wood flooring, you can lay engineered wood over existing flooring, like concrete. It also works with underfloor heating. Another key difference is that you can put down engineered wood by yourself. The floorboards feature a simple tongue and groove construction for easy fitting. 

As engineered wood has a real wood layer, you can continue to sand and refinish it over its lifetime. This helps to remove scuffs and give your flooring a new lease of life, even in high traffic areas. 

Engineered wood is structurally stable and is not prone to expansion and contraction, a common issue with solid wood flooring in different temperature and seasonal weather changes.

Wood Flooring Materials and Finishes 

Engineered wood is made from different types of hardwood like oak, ash, and maple. Solid oak wood flooring is sought after and with a hefty price tag to match. With engineered wood, you get the beautiful finish of timber without the price of solid and many additional benefits.

There is a massive range of finishes and styles to choose from. It really comes down to your own style and design and selecting the correct floor finish to match your vision and lifestyle. 

On top of different woods and styles, you have the type of finish. In general, you can buy engineered wood oiled and lacquered in either satin or matt. An oiled finish is a more traditional option for a very classic finish. A matt lacquer provides a more resistant finish to scuffs, scratches, and splashes. It looks similar to oil but with higher resistance. At the same time, a satin lacquer will create a slightly glossy surface. This finish still has a high level of resistance to scratches and sunlight but with a shinier surface.

The finish you choose really comes down to your taste and where you plan on installing the flooring. If you have a room that gets a lot of use from the family with pets and kids and is a south-facing room with a lot of sunlight, a lacquer finish is ideal. 

Engineered wood flooring is a fantastic way to bring in the natural look of wood without the hassle of installing solid wood flooring. It means that you can use it in rooms that you wouldn’t usually install wood, like the kitchen and bathroom. The construction of engineered wood flooring means that it’s more stable and isn’t prone to the same damage from moisture as hardwood flooring. Engineered wood flooring can elevate a room and complete the overall desired design of a space.

April 19, 2021 — Richard McKay
5 Tips for Buying Engineered Wood-Marcias Flooring

5 Tips for Buying Engineered Wood

If you’re considering investing in engineered wood to upgrade your interior, there are a few factors you need to consider. To help you make the best decision, here are five tips to help you choose the right flooring for your next project. 

In this article: 

  • What is Engineered Wood? 
  • Where Can You Install Engineered Wood?
  • 5 Tips for Buying Engineered Wood

What is Engineered Wood?

When it comes to engineered wood, you have a ton of colours, varieties, shades, tones, and finishes to choose from. Quality engineered wood features a construction of multiple layers of timber with a solid hardwood top veneer layer. The surface or top layer of the flooring is the part you can see. You can sand and refinish the hardwood layer as needed. 

One of the main differences between engineered wood and solid wood is that it allows for expansion. The stable core means that it’s compatible with underfloor heating and can tolerate higher moisture levels than solid wood. Engineered wood looks beautiful and creates a high-end finish without a costly installation. 

Where Can You Install Engineered Wood?

Nowadays, people want their flooring to be more durable, stable and provide better overall performance. To get the most out of your flooring, it’s important that it’s installed in a suitable in the right environment. For example, solid wood flooring isn’t suitable for areas with high moisture levels or underfloor heating systems. The composition of engineered wood makes it suitable for a wide range of environments, including: 

  • Living rooms
  • Stairs and hallways 
  • Open-plan kitchen and dining areas 
  • Bedrooms 
  • Commercial use 

5 Tips for Buying Engineered Wood

There are many reasons why people choose to install engineered wood from increased stability to quick installation. If you’re looking to create a beautiful, high-end finish that’s both durable and stable, engineered wood is a great option. Here are five tips to help make the buying process easier. 

Thick Top Layer

When buying engineered wood, look at how thick the top layer of solid wood is. It’s important to have a thick top layer. Over the years, you might want to buff out any marks, sand it down, or even refinish it to give it a new lease of life. A thick top layer makes all this possible and allows you to expand the longevity, finish, and performance of your flooring. 

Choose Your Finish

You have a few different finishes to choose from when buying engineered wood flooring. This is when the flooring is factory finished using certain oils and lacquers. The benefit of this is that you don’t have to treat the flooring. You can install it straight away without any hassle. Pre-treated boards are protected from damage immediately from accidental marks and scratches. You also have a range of tones, colours, and styles to consider. All of which can impact the room differently. 

Stable Core

Although you don’t see the core in the final product, it’s an important part of choosing engineered wood flooring. High-quality flooring should feature an uber stable core that provides structural stability and expands and contracts. If you’re laying flooring in an area that’s prone to changes in temperature and humidity, a stable core is a must-have feature. 

Ask for Samples

Installing flooring is a big decision. It’s difficult to see how your flooring will look. That’s why it’s important to ask for samples. From the samples, you can get a better idea on the look, feel and texture of your top choices. Samples can be a valuable tool when narrowing down your choices and comparing different board layers and overall thickness and construction. 

Consider Board Lengths

Engineered wood comes in a range of board lengths and widths. These can create different effects and finishes when you install them. The right board dimensions really come down to personal preference. Wider and longer boards may be a little more expensive but easier to fit and install. While shorter and narrower boards can create a more traditional feel, so many be suited to certain projects more. 

There are a few things you need to think about before investing in engineered wood flooring. By choosing a high-quality flooring with a thick top layer, you can find something long-lasting, durable, and beautiful. 

April 14, 2021 — Katie McKay
5 Reasons You Should Choose Herringbone Parquet Flooring-Marcias Flooring

5 Reasons You Should Choose Herringbone Parquet Flooring

If you’re thinking of upgrading your interior, have you considered herringbone parquet flooring? Although it’s been around for a while, it remains a modern and trendy flooring design. The love of geometric patterns in recent times have pushed parquet flooring back to popularity. The increasing popularity of herringbone parquet flooring is due to a wide range of reasons. 

In this article: 

  • What is Herringbone Parquet Flooring?
  • 5 Reasons You Should Install Herringbone Parquet Flooring 

What is Herringbone Parquet Flooring?

Parquet flooring is a type of wood flooring made from individual blocks. Its origins come from the French word parqueterie and date back to the mid-1600s. It’s traditionally associated with Versailles and the Grand Trianon. Parquet flooring uses small wooden blocks to create geometric patterns. 

Originally, parquet flooring was made from 100% solid wood. Nowadays, parquet flooring is either made from engineered wood or solid wood. Engineered wood parquet flooring is made from the construction of layers of different types of wood. The final top layer is hardwood. Whether you choose solid wood or engineered wood, the finish looks similar. The difference between engineered wood and solid wood comes in its structural stability. You can resand the final layer of engineered wood like solid wood, but it doesn’t expand and contract like hardwood. 

Herringbone is a very popular variety of parquet flooring. It’s a specific pattern. Herringbone parquet flooring has a zig-zag pattern that uses perfect rectangles. All the blocks are the same size, and the staggered pattern creates a uniform and sleek finish. 

5 Reasons You Should Install Herringbone Parquet Flooring 

If you’re looking for something elaborate and a unique flooring to add character to your home, herringbone parquet flooring is an excellent option. Here are five reasons you should install parquet into your home.  


Engineered wood parquet flooring is less prone to damage from moisture and temperature fluctuations. Industry finished floors are durable and resistant to scratches and wear and tear. The stable construction of parquet flooring makes it super durable. It can create a unique design in several rooms like kitchens, dining rooms, bedrooms, and entrance halls. 

Flexible & Timeless Design

What’s great about parquet flooring is that it’s available in a range of sizes, colours, tones, grades, and finishes. From traditional size blocks to an oversized modern look, you can find a design that suits your decor. Within the herringbone pattern, you can get single, double, or square herringbone patterns. This design flexibility is hugely attractive when you want to create a great design while maintaining control over the installation. 

High-End Finish

There’s a reason why parquet flooring is so popular. The herringbone pattern is often seen as the height of sophistication. It creates a beautiful high-end finish in practically any room of the house. Parquet floorings are both modern and contemporary while adding a retro and traditional flair. For a stylish and timeless look, you can install a herringbone parquet in various colours and finishes to compliment your home interior design. 

Geometric Patterns

Modernise your flooring with geometric patterns by adding herringbone flooring. Although it’s considered a more traditional flooring system, it’s made a come back as a contemporary and timeless design. Geometric designs easily fit in with any decor and can take your interior to a new level if you’re looking for something a little different. 


Engineered wood parquet flooring has additional structural stability with an elegant oiled finish. Parquet flooring gives a very stable and uniformed finish. This type of flooring contains layers of construction to help minimise movement and increase stability. Herringbone parquet flooring is suitable for both commercial and home environments. 

In recent years, there has been a massive resurgence of popularity for herringbone parquet flooring. The rectangular blocks weave together to create an eye-catching and unique pattern to elevate your interior. Thanks to its versatile appearance and functional features, it’s becoming the go-to choice for many homes. 

April 09, 2021 — Richard McKay
Popular Wood Colour Palettes & Trends for 2021-Marcias Flooring

Popular Wood Colour Palettes & Trends for 2021

With more of us staying at home, many people are trying to upgrade their home and have the time to redecorate. It’s no secret that wood flooring is a highly sought after and popular choice for many interiors and for a good reason. Wood flooring creates a timeless and classic look that can work in practically any room of the house. Whether you’re upgrading the living room or making the home office of your dreams, here are the wood flooring trends and colour palettes you need to look out for in 2021. 

In this article:

  • 6 Wood Flooring Trends You Need in 2021 

6 Wood Flooring Trends You Need in 2021 

Wood flooring is a classic choice. With engineered wood flooring, you have a ton of finishes, colours, and tones to choose from. So, where do you start? Think about the type of style you want to emulate. If you’re looking for light and airy, light oak is a great place to start. But if you have a moodier vintage look, then a parquet flooring might be ideal. 

Although trends come and go, wood flooring remains a popular option for interiors. What changes is the tone, pattern, and shades that go in and out of fashion. While oak flooring will always stand the test of time, we are seeing trends pop up this year to take your wood flooring design to a whole new level. 

Retro Parquet

Wood is a classic choice, and it will always be. One way to mix it up is with a retro parquet finish. Rustic parquet blocks look fantastic and create a crisp interior that’s both retro and contemporary. Retro parquet looks excellent with a few key vintage pieces of furniture with a rustic colour palette. Embrace new trends with vintages pieces to create a retro and contemporary design that elevates your space. 

Deep, Dark Tones

Dark, deeper tones are another popular option. As more people move away from a crisp and light finish, they are using pops of dark colour to create a moodier, more dramatic setting. Compliment darker hues with beautiful wood flooring. 

Make Spaces Bigger with Light Oak

When it comes to design, the amount of space you have plays a significant role in making decisions. Often, when you have a smaller space, you want to create the appearance of a larger, lighter area. Light oak is perfect for making rooms feel bigger. It reflects more light and creates a crisp, contemporary and airy look. A light oak parquet wood flooring is a great way to bring in a retro look but keep those neutral space-expanding colours. 

Home Office Interiors

Over the last year, the home office has become a much more important part of the house. With many people working from home, they are looking to find a way to elevate their workspace for ultimate productivity. Creating an engaging home office interior that’s both ergonomic and beautiful will continue to become even more important. Homeworking has become a norm for many, and the concept of the workplace has been redefined. We’re seeing lots of light space, lush greenery, and neutral tones with an eye-popping backdrop like a statement desk or chair. 

White-Washed & Beachy Tones

White-washed and beachy tones continue to be top-rated wood flooring options, with light ash and grey wood tones coming into the home. It creates a relaxed, laid back vibe in a light and airy space. Light, bright and white colour schemes have dominated home interior trends for a few years now. As more people add pops of colour into the home, a neutral white-washed flooring works well in several colour palettes. 


Herringbone is a type of parquet flooring that continues to be popular in 2021. It’s a traditional style for laying parquet flooring that has a zigzag pattern. There are a lot of different styles and patterns of parquet flooring. Herringbone continues to be one of the most popular patterns, creating a uniformed and stylish look. 

Painted or Coloured Wood

Bang on trend in home decor at the moment is painting wood flooring and panelling in bold and dark shades to create statement design features in Hallways and Living Rooms.  Similarly, selecting a coloured wood in distinctive smoky greys, blacks, deep browns are also popular interior ideas in achieving this.

Whether you love a statement reddish-brown parquet flooring or a more neutral white-washed oak, you can match your aesthetic to your flooring design. Although trends come and go, wood is a timeless option that will continue to look fantastic for years to come. From the beloved Herringbone parquet to a light-reflecting light oak finish, you can find wood flooring suitable for your interior. Upgrade your home with flooring that’s not only durable but looks natural, high-end, and beautiful. 

April 06, 2021 — Katie McKay